Contact Us
TEL: +86-371-67827005
Mob: +8613937162114
Address: Keji Road 5th, Mazhai Industrial Zone, Erqi District, Zhengzhou City, Henan Province
Home > News > Content
Maintenance Technology Of Noodle Packing Machine
Apr 17, 2018

Noodle packer is generally used for packing long fluidity materials with good fluidity. This machine is suitable for long strip materials such as food industry, tea, medicine, chemical industry, daily chemical industry, hardware and so on. Any machine needs regular maintenance. The maintenance of vermicelli packer is probably as follows.

1, the box of the machine is equipped with oil meter. All the fuel should be refueling once the car is started, and it can be added to the temperature rise and operation of each bearing in the middle.

2, the worm gear box must keep the oil for a long time. Its oil surface is all invaded by the worm wheel. If it is used frequently, the oil must be replaced every three months, and the base has oil plug, which can be used for oil.

3, when the machine is oiling, do not spill the oil outside the cup, and do not flow to and around the machine. Because oil is easy to pollute the material and affect the quality of products.

Maintenance instructions

1, check the machine parts regularly, once a month, check the worm, worm, bolts, bearings and other active parts of the bearings are flexible and worn, found that defects should be repaired in time, and can not be used reluctantly.

2, machines should be used in dry clean rooms, and shall not be used in the atmosphere containing acids and other places where corrosive gases are circulated to the body.

3, when the machine is used or stopped, the rotary drum should be taken out to clean and brush the remaining powder in the bucket and then be installed to prepare for the next use.

4, when the drum in the work place before and after the move, the M10 screw bearing soldier to the proper position just before the school. If the gear shaft moves, please adjust the M10 screw behind the bearing frame to the appropriate position, adjust the gap to make the bearing do not sound, the hand turn the belt wheel, and the loose fitting is appropriate, too tight or too loose can cause the possibility of the damage to the machine.

5, disable such a long time, the machine body wipe clean, parts of the surface coated with anti rust oil, covered with cloth punta.

The machine needs to be maintained. During the operation of vermicelli packer, operators should use machines regularly and clean regularly.